Page Comparison

Register to the dteam VO:

1. Open the following link

   • DTEAM VOMS-Admin

   fill in the requested information and after reading the dteam AUP confirm that you abide to this policy and press the submit button.

   In order to verify your email address an email will be sent to you (if you cannot find the verification email in your inbox please make sure to also check your spam folder). By following the link given within the verification email you will have to select the appropriate NGI/Group manager who will handle your request and press the "Continue" button at the bottom of the page. The NGI/Group Manager you selected will be notified of your request and should handle it. Alastair Dewhurst should be one of the available people from RAL

you’ll receive a certificate bundle (.p12) which you can import into your browser

Convert to PEM Keypair

Copy the certificate to a file named myCert.p12 to the computer where you will run voms-proxy-init.

Extract your certificate (which contains the public key) and the private key:

• Extract the certificate:
  openssl pkcs12 -in myCert.p12 -clcerts -nokeys -out $HOME/.globus/usercert.pem

• Extract the encrypted private key:
  openssl pkcs12 -in myCert.p12 -nocerts -out $HOME/.globus/userkey.pem

• You must set the mode on your userkey.pem file to read/write only by the owner, otherwise voms-proxy-init will not use it:
  

  Code Block
  chmod 600 $HOME/.globus/userkey.pem chmod 600 $HOME/.globus/usercert.pem

If you have lcgui05 or similar, copy the usercert and userkey pem files to ~/.globus

run “voms-proxy-init --voms dteam --valid 96:00“

you can now use xrdcp and gfal-copy to access /dteam from any echo endpoint:
e.g. rdr.echo.stfc.ac.uk (prod echo) , ceph-dev-gw1.gridpp.rl.ac.uk (preprod echo)

1. copy in via gridftp

   globus-url-copy file:///home/tier1/[USERNAME]/test_file gsiftp://<url>//dteam:scratch/test_file

   (globus-url-copy requires a full path for the local file)

   or xrootd:

   xrdcp test_file root://<url>//dteam:scratch/test_file

   then you can stat the file in echo:

   xrdfs <url> stat dteam:scratch/test_file

   and finally copy it out:

   xrdcp root://<url>//dteam:scratch/test_file test_file_out_xrd

   and/or copy out via gridftp

   Code Block
   globus-url-copy gsiftp://<url>//dteam:scratch/test_file file:///home/tier1/[USERNAME]/test_file_out_gftp